The Muse is Revealed!

I know it's a little hard to see. I will see if I can get a bigger one soon. I've hand made a PMC stick that is a flower base. The cut up flower petals was the muse - used to be a circle pendant which I cut into 4 sections and - made into a flower. The flower part is a pin and the beetle is a pin so I have two separate pins here that work together.

I also used ndeble (mispelled I know) weave to make the purple calcyx for the flower.
The little story here is there is a beetle that lives on a special flower (hence the similarities in their patterns) with the seed pod.

My beetle pin with wings that echo the pattern on the shell pendant. The body is bead woven in peyote stitch like an amulet bag and the insides has clove oil so the beetle is a bit of clove smell. The shell part is bead embroidered with a little wire work for the antennae.
















I won an award on the Muse contest! Here is the website for the winner's page:
http://www.thebeadersmuse.com/winners2/

I was awarded the "handmade components" award for my pin. And I can finally post photos of my entry!

Good night!

Amanda

Abused Amused Muse

So I know it's been a while since my last post but I've been busy! One of the most exciting things I've done is join the contest "Use the Muse” hosted by the talented Scarlett Lanson, the Bead Maven, of the Beaders Muse website. The challenge to “Use the Muse” is to use beads from a preselected kit of which one element, the muse, is hidden from sight until it is Deadline Day to post entries. The rules enable the entrant to use as many or little beads from the kit but they must Use the Muse in order to be eligible to enter the contest. Use this link to see a photo of the Use the Muse kit and contest entry rules: http://www.thebeadersmuse.com/use-the-muse-contest2/.

So there are a bunch of us out there that know what the Muse is this year but we aren’t telling or showing! ‘Cause doing that gets you disqualified.

The kits are sponsored this year by Artbeads.com and Rainbows of Light with a gorgeous spectrum of peacock purples, blues and many sparkly Swarovski crystals and pearls. I just couldn’t resist these colours as they are all my favourites so why fight the battle.

When I received my kit in the mail I immediately had to have a fab play – so many possibilities! The Muse truly is stunning but me being me I had to abuse my Muse. The poor thing is lying in pieces trying to recover on my work bench (aka a Tupperware container next to the TV) as I can never leave things alone. So far I have used my coping saw and the DH’s bench drill on the Muse. I like doing things like this though – evil laughter.

So here are a few sneak peak sketches at what I have in mind. I’m thinking flowers and bugs. I don’t know why but those bugs keep haunting me (time to fumigate our house?) so bugs it is. So far I’m using seed bead embroidery as Right Angle Weave and Brick Stitch have both failed in what I want to achieve. By the end a bug will have a few different weaving techniques including embroidery and odd stitch peyote. Probably a few more too that I just don’t know what they are called.

I will also use some wire working skills on a flower, maybe some metal working skills depending on how frustrated I get. Certainly more embroidery and French wire floral techniques too.

And in the end I’ll probably end up with 2 long stranded necklaces on simple tiger tail. Who knows? I certainly can say that the Muse as struck my imagination, amused me, and been abused by me so far!

Hand Carved Lion Cross Pendant

I was approached via internet by a client to create this fantastic lion pendant in 3d relief sterling silver. The drawing is the client's own art work and created a big challenge for me given that I've usually done my wax carving from my own images. Well away we go!

I quickly decided to work on the head and the cross portions separately, so if I stuff up it's only half of the whole! I had to start on the head because that face fascinated me.

I started by producing a whole sheet of the left image in exact dimensions (2.5 inches x 1.5 inches) multiple times to use as line drawings on the wax tablet. Then I started by literally cutting the lines of the face through the paper onto the wax - with many images to start anew with once one image got too shredded.





Once I was satisfied with the line drawing emerging on the wax I started the difficult part - removing the wax that doesn't belong. I spent a lot of time (4 months!) doing this slowly, methodically and carefully to ensure I got it right the first time. Here is a first draft of the head. The sides were still about 3 mm thick (mouth being closer to 4 mm) and the client wanted the mane thinner. So more careful carving.




The best part of this carving wax is that it's opaque and, when held to light, you can compare the shades of green to see where it is thin or thick. Here is the final head carving held so the client could see how it was made thinner. The head is really cool at this point.




So the next task was to do the cross. Now given how complicated the head is, I was actually dreading the cross more because although it appears simple (all straight lines) I was more apprehensive about this shape because it demanded perfect hand control to achieve symmetry. To create the curves I used the bench drill and various bit sizes and then carved the points after this. I used a lot of line grids to help control the symmetry at this point. It then sat like this for over a month while I tried to figure out how I was going to make the points of the cross at a 45 degree angle meeting on the edge like a V, or a wedge. My technical minded husband gave me a good idea that worked a charm. Use the angled side of a plastic ruler as the slope there is about 45 degrees AND gives me a hard straight edge to use as a template! Eureka! After this point the pendant wax carving process went along very smoothly.


After getting everything done, I melted the join between the cross and the head to create this final wax carving mold for the casting company. One thing I've learned over the last few projects is that the more I make the wax nice and smooth, the more smooth my casting will be. So I used an old bedsheet to smooth away all scratches.




Here's the casting (after a bit of clean up) before I put the star sapphire in a bezel setting and finalised the bail.










And here is the final pendant compared to the original drawing again!

I'm really pleased with the end results and look forward now to other original works like this one!